Usage Instruction

Step 1: Preparation & Disinfection

• Check that the product packaging is intact, unexpired, and undamaged.
• Disinfect the product surface with 75% alcohol to ensure it is free from contamination.
• Wash hands and the genital area. Choose a clean, quiet, and comfortable environment for use.

Step 2: Component Connection & Air Expulsion

• Attach the extension catheter and two-way valve to the balloon catheter in sequence. Ensure secure connection.
• Open the two-way valve and use a syringe to fill the balloon with normal saline to expel air. Then close the valve.

Step 3: Insertion & Fixation

• Apply water-based lubricant evenly on the balloon catheter surface to reduce discomfort.
• Gently insert the device into the vaginal cavity and adjust the depth as needed.

Step 4: Inflation & Expansion

• Open the two-way valve and inject normal saline slowly using a syringe.
• Gradually increase the saline volume until the balloon reaches the inflation level recommended by your physician or therapist.
• Then close the valve.Leave the device in place for the duration specified by your physician or therapist.

Step 5: Deflation & Removal

• Open the two-way valve and withdraw all saline using a syringe to fully deflate the balloon.
• Once deflated, gently remove the device.

Step 6: Cleaning & Storage

• Clean both the exterior and inner lumen of the balloon catheter with a neutral cleanser and 75% alcohol after each use.
• Allow to dry completely. Store the device at room temperature in a dry, well-ventilated area.
• Avoid moisture, compression, bending, or exposure to direct sunlight.
• Do not reuse the product if it shows any signs of damage or deformation.

Step 7: Reuse Guidelines

• The product is reusable. Under normal use and proper storage, it supports up to 90 hours of total inflation time or up to 300 uses.
• Recommended usage period 3 months.
• Clean and disinfect thoroughly after each use to ensure hygiene and safety.